To
return to the main page, click HERE.
My email
address: ianm@trs-80.com
HI-RESOLUTION
GRAPHICS PAGE:
Software
& Hardware
(Model
III/4/4P/4D)
Tandy's first hi-res board was for
the Model II computer(cat. no. 26-4104), which was quickly followed by the
Model III hi-res board (cat. no. 26-1125).
Finally when the Model 4 was released a hi-res board was available (cat.
no. 26-1126). All these hi-res boards
were very expensive and sold in small numbers and had little software support
from Radio Shack. µLabs produced a
compatible, but less expensive Model 4 hi-res board called the Grafyx Solution along with a catalogue of software. All these boards featured 640x240 (153,600
pixels) resolution and special BASIC language upgrade which included commands
like LINE, CIRCLE, PAINT, and VIEWPORT.
By the mid-1980s a reasonable number
of interesting and sophisticated software packages had been released for the
Model III/4 hi-res boards. This page
aims to have these software packages available for download, and a place to buy
the necessary hardware - some in kit form, some fully assembled - to upgrade
your Model III, 4, 4P or 4D for hi-res graphics.
--------------------------------
HARDWARE:
Model 4P "Improved
Grafyx 5.1(.1)" HRG board!
(Released
7th June, 2015)
- COMPLETLY ASSMEBLED AND TESTED! JUST PLUGS
IN NO SOLDERING REQUIRED! -
This is my latest hi-res graphics (HRG) board based on the
old µLabs GX 5.1 board which has been unavailable since the late 1980s. This one utilises an updated design with
fewer chips, smaller footprint, while still having a 25% performance increase
over Tandy's HRG and compatible with most software for both the GX 4.2, 5.1,
and Tandy's HRG.
This great new device works in all desktop Model 4Ps: the
original non-gate array M4P and the gate-array M4P. For a video of this HRG in
action, click HERE.
Only
$USD179.99!
($A237.50)
--------------------------------
HARDWARE:
Model 4/4GA/4D
"Improved Grafyx 4.2(.1)" HRG board!
(Released
3rd April, 2015)
- COMPLETLY ASSMEBLED AND TESTED! JUST PLUGS
IN NO SOLDERING REQUIRED! -
This is my new hi-res graphics (HRG) board based on the old
µLabs GX 4.2 board which has been unavailable since the late 1980s. This one utilises an updated design with
fewer chips, smaller footprint, while still having a 25% performance increase
over Tandy's HRG and compatible with all software for both the GX 4.2, 5.1, and
Tandy's HRG.
This great new device works in all desktop Model 4s: the
original non-gate array M4, the gate-array M4, and the 4D. For a video of this
HRG in action, click HERE.
Only
$USD179.99!
($A237.50)
--------------------------------
HARDWARE:
Original style 20K µLabs
Grafyx Solution HRG boards!
(Released
1st August, 2015)
- COMPLETLY ASSMEBLED AND TESTED! JUST PLUGS
IN NO SOLDERING REQUIRED! -
Purists have asked if they can still buy the original design µLabs
Grafyx Solution 4.2 and 5.1 boards with the 10 SRam chips on them (total memory is 20K) and so I've made a
small amount of them. Due to the
additional parts and labour required I ask a premium for these over the
Improved HRG boards (above).
NOTE: at this point in time, if you want to run AnsiTerm 4 you must use this HRG board!
Only $USD189.99!
($A255.50)
--------------------------------
HARDWARE:
Cable Kit for Model
II/12/16/16B/6000 HRG
(Released
1st June, 2015)
- COMPLETLY ASSMEBLED AND TESTED! -
If in 2014 or 2015 you bought one of the HRG boards on eBay
sold by rpsi92 in the USA, you quickly found that it lacked the pair of special
cables required to hook the board up to your system. They are made from a combination of New and
NOS (hard to find) parts and work perfectly.
For a video of how to set up these cables and your HRG board,
click HERE.
Only
$USD75.00!
($A97.99)
--------------------------------
HARDWARE:
(Added
1st August, 2015)
Model III HRG board
(26-1125) reproduction
- ADVANCED KIT FOR EXPERIENCED ELECTRONICS
ENTHUSIASTS -
In the kit: reproduction PCB, 2 pre-programmed GALs, 2 pre-programmed PROMs, an
LTC1799 Xtal chip, BOM and basic construction
details. Works on the Model III and can
be modified to work on the Model 4 non-gate array computer.
NOTE: requires extensive soldering skill, as well as cable
assembly skills, sheet metal skill (to mount the board in the system), and the
ability to obtain hard-to-locate obsolete parts. I may question your ability before selling
the kit as this is not for novice electronics learners, and if I feel you may
run into trouble completing the kit I may chose not to sell it - don't mind me,
I'm just looking out for your best interests.
Only 5 will be made available for a sale price of:
$USD79.95 each!
($A109.50)
--------------------------------
OPERATING SYSTEMS:
(Added 19th March, 2015)
Download the following
operating systems to get started using your hi-res board:
TRSDOS 1.3 - DOS with
BASICG - Model III (came with 26-1125)
TRSDOS 6.01.02 - DOS with BASICG -
Model 4 (came with 26-1126)
Grafyx Solution Software - GBASIC - Model 4 (came with µLabs board)
Grafyx Solution Software DOWNLOAD for Model 4
Grafyx Solution Software - GBASIC - Model III (came with µLabs board)
Grafyx Solution Software DOWNLOAD for Model III
GBASIC-63 for TRSDOS 6.3 - Model 4
(came with µLabs board)
GBASIC-63
DOWNLOAD for Model 4
--------------------------------
SOFTWARE:
(Added 9th March, 2015)
Download the following
software packages to use on your hi-res board:
xT.CAD - Computer Aided Drafting - Model III/4
--------------------------------
PostMaster - it's like PrintShop® for the
Model 4
--------------------------------
AnsiTerm 4 - Proper ANSI terminal emulation for the Model
4
AnsiTerm DOWNLOAD disabled until further notice.
(Those interested in
running AntiTerm need to contact me BEFORE ordering your Improved Grafyx board.)
--------------------------------
OLD µLABS SOFTWARE:
(Updated 28th July, 2015)
Download the following
software packages to use on your hi-res board:
Fractals - Mandelbrot Set
Explorer - Model 4
--------------------------------
Tournament Chess - Model
4
--------------------------------
Bizgraph Software - Model III/4
--------------------------------
Pro-Draw Software - Model
III/4
--------------------------------
Dog Catcher Game - Model
4
--------------------------------
3D-Plot Software - Model
III/4
--------------------------------
Draw Software - Model
III/4
--------------------------------
MathPlot Software - Model III/4
--------------------------------
Life Experimenter with
Spiro-Graph - Model 4
--------------------------------
Pascal Routines by David
Ryan - Model 4
-----------------------------------------------------------------------------------------------
Slot4Mod4 and VidPokr4 - Model 4
Slot4Mod4 and
VidPokr4 DOWNLOAD
-----------------------------------------------------------------------------------------------
MacPaint® Clone - in BASICG for Model 4
-----------------------------------------------------------------------------------------------
MagicDraw - 128K Model 4 with LS-DOS 6.3.1
MagicDraw requires a 128K Model 4 or 4P with LS-DOS 6.3.1, a 3-button serial mouse
and relevant adapters to connect to the Model 4 or 4P serial port. If your early Model 4 non-gate array has no
serial board then you need to add one as well.
-----------------------------------------------------------------------------------------------
CN80 Hi-Res Utilities Package by
David Goben - Model 4
-----------------------------------------------------------------------------------------------
MultiDOS v5.11 High-Resolution BASIC - Model 4
--------------------------------
MultiDOS 5.11 (if needed)
-----------------------------------------------------------------------------------------------
Hi-res software with no photos
- Quick
downloads of interesting software in DMK, DSK or JV3 format -
To
return to the main page, click HERE.